• Type U420-SPX/SS
• Length 4300mm horizontal
• U trough partially covered with lids
  Vertical flared hopper inlet
  One axial outlet
  Material trough: 3mm 304SS
  Liner:  15mm extra wear resistant DURAFLO SPZ
• Spiral of High Tensile Micro-Alloyed Steel, 0365-70x25mm (insert for last 1.5m)
• Driveshaft, bellhousing, endplate to suit gearbox type SEW SPIRODRIVE SD77 DT100L$ 3kw/16rpm C/W 415V – 50Hz – 3Ph – IP56 motor
• Including supports

• Type U420-SPX/SS
• Length 5600mm vertical
• Octagonal trough
  One axial inlet
  One vertical outlet
  Material trough: 3mm 304SS
  Liner:  15mm extra wear resistant DURAFLO SPZ
  
• Spiral of High Tensile Micro-Alloyed Steel, 0390-60x25mm + Insert
  
• Driveshaft, bellhousing, endplate to suit gearbox type SEW SPIRODRIVE SD77 DV132M4 7.5kw/48rpm C/W 415V – 50Hz – 3Ph – IP56 motor
• Excluding supports but including support brackets

Bottom tank 23Kl capacity

• Inside Diameter 2900mm
• Btm Strake 3.0mm thk
• 2nd Strake 3.0mm
• top Strake 3.0mm
• Sloping Base 2.5 Deg x 2.5mm thk
• Top Cone Offset x 3.0mm thk x 15 deg
• 600mm wide cavity
• 75mm outlet
• 75mm Racking Point
• Lockable sample top
• Offset Clamp seal Expansion Chamber

Top Section

• Inside Diameter 2910mm
• Strakes 1 x 3.0
• Strakes 1 x 2.5mm
• Top stiffening ring 75 / 75 / 6 SS angle
• 600 x 600 square door hinged upwards
• 75mm Knifegate valve outlet in door
• Base cone offset x 3.0mm thk x 15 Deg
• Void between top and bottom to be filled with 2 pack foam
• 600mm wide cavity